Convert any photo into a build-ready toy-brick mosaic. Choose the baseplate size and a palette of real brick colors, preview the studs, then get the exact parts count and a printable section-by-section build guide PDF.
Last updated:
Parts list
#
Color
Pieces
+5% spare
Share
Advertisement
Advertisement
How to use the Brick Mosaic Generator
Add a photo: drop, paste or choose an image. Simple, high-contrast photos and portraits work best. A sample is loaded to start.
Choose a size such as one 48×48 baseplate, or set a custom width and height in studs.
Pick colors: start with a palette preset and click color chips to add or remove colors you own.
Adjust brightness, contrast, saturation and dithering until the preview looks right.
Download the parts list (CSV), the build guide PDF and a PNG preview.
Brick mosaic sizes and piece counts
Size (studs)
Pieces
Finished size
Typical use
16 × 16
256
12.8 × 12.8 cm (5.0 in)
Coasters, icons, small logos
32 × 32
1,024
25.6 × 25.6 cm (10.1 in)
Small portraits, pixel art
48 × 48
2,304
38.4 × 38.4 cm (15.1 in)
Classic single-baseplate portrait
64 × 64
4,096
51.2 × 51.2 cm (20.2 in)
Detailed portraits, wall art
96 × 96
9,216
76.8 × 76.8 cm (30.2 in)
Large wall art from 2 × 2 large baseplates
128 × 128
16,384
102.4 × 102.4 cm (40.3 in)
Statement pieces, group builds
Formula: pieces = width × height and size in cm = studs × 0.8 (one stud pitch is 8 mm).
Tips for a great-looking mosaic
Crop tight. At 48 studs wide, every stud counts. Faces should fill most of the frame; the tool crops the center of your photo to the chosen ratio.
Use a plain background. Busy backgrounds turn into noise at low resolution. Remove or simplify it before converting if you can.
Boost contrast slightly for portraits, and use the Portrait or Sepia palette for natural skin tones with few colors.
Dithering or not? Dithering gives smoother gradients in skies and skin, while None gives clean, graphic areas that are easier to build.
Limit to colors you own. Click color chips to switch colors off; the parts list updates instantly.
Building from the guide
Sort your pieces by the color numbers from the parts list.
Build one 16 × 16 section at a time, starting with A1 (top-left). Thick lines on each page divide the section into 4 × 4 blocks so you can keep your place.
Press each piece firmly onto the baseplate and check every completed row against the guide before moving on.
Frequently asked questions
How big will my brick mosaic be?
One stud is 8 mm wide, so the physical size is the number of studs × 0.8 cm. A 48×48 mosaic is 38.4 × 38.4 cm (about 15.1 in), a 32×32 one is 25.6 cm, and a 96×96 mosaic made from four 48×48 baseplates is 76.8 cm square.
How many pieces do I need?
One 1×1 piece per stud: width × height. A 48×48 mosaic needs 2,304 pieces and a 64×64 needs 4,096. The parts list shows the exact count for every color. It is wise to buy about 5% extra, because small pieces are easy to lose.
Which pieces should I use?
Most brick mosaics use 1×1 round plates, 1×1 square plates or 1×1 flat tiles pressed onto a baseplate. Round plates give a classic dotted look and are usually cheapest; flat tiles give a smooth, modern finish. Choose the style in the tool to preview it; the counts are the same.
How are colors chosen?
Your photo is first scaled down to one pixel per stud. Each pixel is then matched to the closest color in your selected palette using the CIELAB color space, which measures color difference closer to how people see it than plain RGB. With dithering on, the rounding error is spread to neighboring studs, which gives smoother shading with few colors.
How do I read the build guide?
The PDF starts with a cover page with the preview and the full parts list, where every color has a number. Then the mosaic is split into 16×16 sections, one per page, labeled by row letter and column number (A1, A2, ...). Each square shows the color number, and a mini map shows where the section sits.
Are the colors exactly the same as real bricks?
The palette uses widely used approximations of common brick colors. Real plastic looks slightly different depending on lighting and screen settings, so treat the preview as a close guide. You can switch off colors you do not have so the mosaic only uses pieces you own.
Is this affiliated with any toy brick brand?
No. This is an independent free tool. It works with any compatible building bricks and plates.
Are all the tools on FreeToolCabin tested for quality and accuracy?
Yes! Every tool on our site undergoes automated Q/A testing in real browser environments to ensure high precision, correct output, and zero errors. If you happen to spot a bug or have a suggestion, please contact us at [email protected] and our team will review it right away.